SERUM Total Maintenance: Step 2 of 2 (2 L)

    $99.95

    Qty

    1) ADD YOUR NORMAL WEEKLY CHEMICALS
    Add your normal sanitizer & weekly chemicals as recommended by your spa
    manufacturer or local spa professional. The brand and/or type does not matter.
    2) TURN PUMP ON WITH JETS.
    3) ADD 1 CAPFUL ( 1 PER EACH 100 GALLONS) OF SERUM TOTAL MAINTENANCE
    LIQUID TO HOT TUB. (4 capfuls max). You may see the spa water begin to foam.
    EXCESSIVE FOAM
    In some cases adding foam may be substantial. This is normal and an integral
    part of the purge process. If it gets too foamy and starts to spill over the
    edge, just turn off the jets and the bubbles will subside within 10-15 minutes… Then
    restart jets again. Repeat steps for 45 min to 1 hour.
    SOFT WATER
    If you spa water uses soft water reduce the amount of Serum weekly maintenance
    used by 50%
    (Remember Serum Weekly Maintenance is a concentrated formula so if in
    doubt use less than you think you need.)
    4) REPEAT EVERY 7-10 DAYS

    Repeat steps #1-4 as “How to use as startup” as part of your weekly hot tub maintenance program.

    Hot Tub Serum products work in conjunction with your regular sanitizer. It is important that you maintain sufficient sanitizer
    in your hot tub at all times. Do not let your sanitizer run out!
    If you hot tub water becomes cloudy/foaming/yellow/green/
    smells then you should shock the water and increase sanitizer
    level. If poor water conditions persist, Clean your cartridge filters and repeat step 1: Serum Cleanse.

    Simple and easy to use

    Helps keep water balanced

    Keeps water clean and clear

    Helps you enjoy your hot tub experience longer

    Ultimately safe and very effective

    Improves hot tub performance